All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
Send us inquiry
For inquiries about our products, please email us your detailed requirements and we will be in touch within 24 hours.
Send Email
Became a distributor
Please email us your company information and we will be in touch within 24 hours.
Description
Model:LGHMS310H
Series:LGHMS
Product Lines:Industrial Tools
- All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
- LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
- Quickly and easily mount on a wide range of applications
- Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
- Lock-on jaws offer a secure grip for safe and easy operation
- Synchronous jaw movement enables the entire pulling job to be performed by a single operator
- LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. A point protector is included with every puller.
- RIVERLAKE cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
Think Safety
Manufacturer’s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!
Image Gallery
Specifications
| Maximum Operating Pressure (bar) | 700 |
| Capacity(Ton) | 10 |
| Power Source | Hand Pump |
| Max. Spread(mm) | 300 |
| Min. Spread(mm) | 84 |
| Max. Reach(mm) | 215 |
| Number Of Jaws | 3 |
Series Comparison
| Model | Capacity(Ton) | Power Source | Max. Spread(mm) | Min. Spread(mm) | Max. Reach(mm) | Number Of Jaws | Weight(Kg) |
|---|---|---|---|---|---|---|---|
| LGHMS310H | 10 | Hand Pump | 300 | 84 | 215 | 3 | No Data Yet |
| LGHMS314H | 14 | Hand Pump | 380 | 125 | 260 | 3 | No Data Yet |
| LGHMS324H | 24 | Hand Pump | 480 | 165 | 336 | 3 | 95 |
| LGHMS364H | 64 | Hand Pump | 660 | 230 | 408 | 3 | No Data Yet |
You May Be Interested In
RAC208, 20 Ton Capacity, 200mm Stroke, Single Acting General Purpose Aluminum Hydraulic CylindersThe RAC-SERIES is a general-purpose lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAC cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.Get a Free QuoteNS70105, M45-M72, Heavy Duty Hydraulic Nut SplitterRIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…Get a Free QuoteUK-12inCB, 12 Ton Integral Hydraulic Cobra PullerRIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 10 tons to 50 tons and are portable tools for bearing removal applicationsGet a Free QuoteRC101, 10 Ton Capacity, 26mm Stroke, General Purpose Hydraulic CylinderThe RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…Get a Free QuoteNSH6575, M42-M48, Split Type Hydraulic Nut SplittersRIVERLAKE split type hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic…Get a Free QuoteIPH-1234, 10 Ton, H Frame Hydraulic Workshop Press With Hand PumpRIVERLAKE manufacturers H-type manual and electric powered hydraulic workshop press with a capacity ranging from 10 ton to 200 ton. our products are widely commonly used for forging, clinching, molding, blanking, punching, deep drawing, and metal forming operations. The RIVERLAKE hydraulic press is advantageous in manufacturing, it gives the ability to create more intricate shapes…Get a Free QuoteEPS1500, 150Mpa Electric Bolt Tensioner PumpRIVERLAKE supplies a wide range of electric hydraulic bolt tensioner pumps and our ultra-high-pressure electric tensioner pump series comes with a variety of operating pressures for your selection:150Mpa,200Mpa,250Mpa, and 350Mpa.Get a Free QuoteCLSG8002, 800 Ton Capacity, 50mm Stroke, Single Acting High Tonnage Hydraulic CylindersThe CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.Get a Free QuoteSCH606, 60 Ton Porta Power, Hollow Hydraulic Cylinder And Hand Pump SetReady-to-use hydraulic cylinder and pump sets. RIVERLAKE porta powers and sets provide the quickest and easiest way to start working right away. All kits include a single-acting hydraulic jack (ram), two-speed pump, 1.8 meters hydraulic hose, calibrated gauge, and gauge adaptor. Kits are available with 5 to 100-ton jacks (rams). Hydraulic jacks (rams) are available…Get a Free QuoteRCS502, 45 Ton Capacity, 60mm Stroke, Single Acting Low Height Hydraulic CylindersThe RCS series is a spring return, compact flat cylinder designed for use in narrow spaces and areas with low overhead clearance. They can be used in maintenance, machinery leveling, construction, and mining applications. RCS-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and bronze overlay piston bearing area…Get a Free QuoteHC3TW, Light Weight Hydraulic Torque Wrench PumpsRIVERLAKE electric hydraulic torque wrench pump adopts a brushless motor, making it a maintenance-free pump with low noise. We use parts from reputable suppliers such as HAWE, SIEMENS, WNM, etc. feature a compact design, high volume efficiency , low noise, stable operation, and long working life.Get a Free QuoteCLSG30012, 300 Ton Capacity, 300mm Stroke, Single Acting High Tonnage Hydraulic CylindersThe CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.Get a Free Quote
